Panasonic NPM-TT2 Pick and Place Machine

Panasonic NPM-TT2 Pick and Place Machine
Max PCB:510 x 590mm
Application components:0402 (01005)
Compatible with lightweight 8-nozzle or 3-nozzle head V2

Panasonic NPM-TT2 Pick and Place Machine

Specifications:

Panasonic NPM-TT2 Pick and Place Machine

The NPM-TT2 (Next Production Modular-Twin Tray II) platform represents the next generation in twin tray modular production from Panasonic’s award-winning NPM platform—ideal for any mix.

Further bolstering the SMT process to accommodate more tray-supplied parts in full independently-run-lane mode, the NPM-TT2 processes boards up to 510 x 590mm and its dual lane functionality allows assembly of more of one product or two different products at the same time.

As common throughout the NPM-series, the NPM-TT2 features a Multi-Recognition Camera that increases processing speeds with a dynamic vertical-view of component condition and eliminating the need for a standard line cameras and independent 3D sensors.

With a new, advanced lightweight 3-nozzle head V2 (100N), pin-in-place lighting option and stackable stick feeders, the NPM-TT2 leads the way in terms of odd-placement capabilities.

Designed to blend seamlessly with other Panasonic NPM-series equipment as well at the NPM-DX, the NPM-TT2 optimizes throughput in a high-volume, dual-lane environment

Features & Benefits

Compatible with lightweight 8-nozzle or 3-nozzle head V2

Part Range: (01005) 0402 chip to 1 20L x 90W x 28T to BGA up to 80 x 80 component range

Process up to 40 trays and 26 fixed tape and reel inputs per side for a total of 92 available inputs

Minimize downtime with pre-pickup smart tray component inspection and interchangeable feeder and tray locations

Compatible with CM and NPM-series intelligent feeders & nozzles

Model

 NPM TT2

NPM TT2

PCB
dimensions
(mm)

PC size Single-lane mode

L 50 x W 50 ~ L 510 x W 590

PC size Dual-lane mode

L 50 x W 50 ~ L 510 x W 300

M size Single-lane mode

L 50 x W 50 ~ L 510 x W 510

M size Dual-lane mode

L 50 x W 50 ~ L 510 x W 260

PCB exchange time

Single-lane mode

4.0 s (With no component mounted on the reverse side of PCB)

Dual-lane mode

0 s* *No 0s when cycle time is 4.0 s or less

Electric source

3-phase AC 200, 220, 380, 400, 420, 480 V 2.5 kVA

Pneumatic source

Min.0.5 MPa, 200 L /min (A.N.R.)

Dimensions *1 (mm)

W 1 300*2 x D 2 798*3 x H 1 444*4

Mass Weight

2 690 kg Only for main body

Placement head

Lightweight 8-nozzle head
(Per head)

3-nozzle head V2 *5
(Per head)

Placement speed

PC size

18 000 cph (0.20 s/chip)

7 200 cph (0.50 s/chip)
5 900 cph (0.61 s/QFP)

M size

17 460 cph (0.21s/chip)

6 984 cph (0.52 s/chip)
5 723 cph (0.63 s/QFP)

Placement accuracy
(Cpk>
1)

± 40 µm/chip
± 30 µm/QFP
 12mm to 32mm

± 50 µm/QFP12mm Under

±40 μm/ chip
±30 μm/ QFP

Component
dimensions
(mm)

0402 chip*6 to L 32 x W 32 x T 12

0603 chip to L 150 x W 25 (diagonal152) x T 30

Component
supply

Taping

Tape : 4 to 56 / 72 mm

Tape : 4 to 56 / 72 / 88 / 104 mm

Specifications for front/rear tray feeders : Max.52
Specifications for front/rear feeder carts : Max.120 (Tape:4, 8 mm)

Stick

Specifications for front/rear tray feeders : Max.12 (Single stick feeder)

Specifications for front/rear feeder carts : Max.28 (Single stick feeder)

Tray

Max.40 (Front supply unit : Max. 20 + Rear supply unit : Max. 20)

*1 : Only for main body
*2 : 1 820 mm in width if extension conveyors (260 mm) are placed on both sides
*3 : Dimensions shown are specifications for front/rear tray feeders . Dimensions of specifications for front/rear feeder carts : 2 893 mm
*4 : Excluding the monitor, signal tower and ceiling fan cover.
*5 : 3-nozzle head V2 cannot be installed on NPM-D3
*6 : The 0402 chip requires a specific nozzle/feeder.
*Placement tact time, inspection time and accuracy values may differ slightly depending on conditions.
*Please refer to the specification booklet for details.

Keywords:

Hanwha SM481 Plus Pick and Place MachineHanwha SM482 Plus Pick and Place MachineHanwha SM471 Plus Pick and Place MachineHanwha Decan S2 Plus Pick and Place MachineHanwha SM481 Plus SMT Assembly LineHanwha SM482 Plus SMT Assembly LineHanwha SM471 Plus SMT Assembly LineHanwha Decan S2 SMT Assembly Line.

We provide Hanwha SMT assembly line solutions, including Hanwha Assembly Line Equipments Hanwha productsHanwha Pick and Place MachineHanwha SMT Stencil PrinterHanwha Assembly LineHanwha SMT Reflow OvenHanwha SMT Inspection MachineHanwha SMT Spare PartsHanwha SMT Peripheral Equipment;  any kind SMT equipments you may need, please contact us for more information: wechat whatsapp:+8613691605420, Email: sales@flason-smt.com
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail/skype/phone/wechat online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. We have customer world wide, you can check our credit service with them !
B. Free Online installation, traning, programming and technical support !
C. One stop full Through Hole Assembly Line Equipments Solutions !

INQUIRY

CATEGORIES

CONTACT US

Contact: Tommy

Phone: +86 13691605420

E-mail: sales@flason-smt.com

Add: No.94,Guangtian Road,Songgang Street,Bao an District Shenzhen China