Wave Soldering Machine KTU-350

Preheating zone 4 zones
Solder pot capacity Approx.480kg
Weight Approx.1500kg
Dimension 4500*1600*1730mm

Wave Soldering Machine KTU-350

Specifications:

Wave Soldering Machine KTU-350

Machine cover

Structure Streamline cover design, the frame is made of thick square tube, the cover is made of 2mm steel plate. There are totally 6 wheels to move the machine easily.

Front door structure Fully enclosed glass door, transparent,pneumatic holder to support, ensure the operating and repairing space.

Machine top Anti-explosion lamp

Surface treatment Painted with white color

Flux spraying

Spray nozzle Spray range:20~65mm,adjustable,nozzle height: 50~80mm adjustable,max. flow rate:100ml/min

Air circuit Acid and alkali resistant air pipe, the brand is SMC from Japan.

Nozzle moving system Step motor to drive, Mitsubishi PLC, with proximity switch and entrance sensor to control, according to the coming PCB’s speed and width, the spraying system can detect and starts to work.

Flux recycle system Tray to hold the waste water and flux, can be draw out easily, make maintenance very convenient.

Flux exhaust system Exhaust system:stainless steel mesh frame+ double layers filter,recycle the flux to maximum.

Isolated air curtain Air pressure type knife, blow the redundant flux into the recycling box, to avoid the flux to enter into the preheating zones, ensures the safety.

Spraying box structure Made of full stainless steel, easy to clean and repair. Anti-corrosion, very durable.

Preheating

Preheating zone quan. Preheating length is 1800mm, divided into 4 sections, supply abundant adjusting space, very good for big PCB and complicated PCB. Reduce the heat impact on PCB, improve the production efficiency.

Temp. control method Mitsubishi temp. collecting module, PID is very precise and stable.

Heating parts The heaters are imported from Taiwan, heat up very fast, with long life, small thermo lag; The heat is even in the zones.

Preheating power 22kw

Install mode The heating module adopts drawer design, easy to replace and repair, make the maintenance very convenient.

Transmission

Rail Made of aluminum, wear resistant and without distortion.

Rail parallelism Width adjusting accuracy less than 0.2mm

Width adjust Manually/motorized

C/V speed setting unit Min.1mm/min 0-1800mm/min

C/V speed variation range Electric closed-loop control, within 0-10mm/min

Conveying motor Panasonic motor from Japan

Solder pot

Low oxidization design High quality solder pot, the heat is very steady. Adopts liquid solder flow design, reduce the impact oxidization, especially for small PCB.

Economical running Reduce the power consumption

Moving method Motorized

Wave adjustable height 0-18mm

Wave motor TCG motor from Taiwan,adjust the wave height with frequency conversion.

Preheating parts Adopts the stainless steel heaters from Taiwan, with long life and power saving up to 40% daily.

Cooling

Cooling method Adopts high power centrifugal fan, reduce the air bubble and solder pad stripping

Automatic finger cleaning

Imported premium pump, can wash the fingers from both sides. Propyl alcohol to clean and can be recycled.

Control software

★Automatic alarm function for failure::thermocouple abnormal,temperature is too high or too low;if preheating system or solder pot is abnormal, the heating stops.

★Preheating temp., solder pot temp., conveyor speed, spraying and cooling can be controlled separately.

★One week automatic power on/off setting (three times one day)

★The emergency stops are in front, rear of the machine, press them in case of any emergency.

Model

KTU-350

Solder pot type

4th adjustable

PCB width

Max.50~350mm

Heating technology

Matrix straight heating, heating efficiency up to 95%

PCB convey height

750±50mm

Solder pot temp.

Room temp. to 350℃,accuracy±1-2℃

Conveyor speed

0-1800mmMin

Solder pot temp. accuracy

±1℃

Angle

3~7 degree

Finger types

Strong titanium finger /customized

Component height limit

Max.100mm

Solder bar adding way

Manually

Wave height range

0~18mm keep steady

Temp. control

P.I.D +SSR

Wave quantity

2

Machine control

PLC+PC

Preheating length

1800mm

Width adjust

Manually/motorized

Preheating zone

4 zones

Flux adding way

Automatic

Conveyor direction

Left to right

Flux flow rate

10~100ml/min

Preheat power

10KW

Spray method

Step motor+ ST-6 nozzle

Preheat temp.

Room temp. to 250℃ (adjustable)

Flux recycle

Tray to collect

Heating model

Hot air

Electricity

3P 5 wires 380V/3P 220V

Solder bar type

Lead-free

Total power

Max.22kw

Solder pot power

14kw

Normal running power

Approx.3-5kw

Solder pot capacity

Approx.480kg

Air supply

4~7KG/CM2

Solder pot material

Cast iron

Dimension 

4500*1600*1730mm

Weight

Approx.1500kg

Keywords:

Hanwha SM481 Plus Pick and Place MachineHanwha SM482 Plus Pick and Place MachineHanwha SM471 Plus Pick and Place MachineHanwha Decan S2 Plus Pick and Place MachineHanwha SM481 Plus SMT Assembly LineHanwha SM482 Plus SMT Assembly LineHanwha SM471 Plus SMT Assembly LineHanwha Decan S2 SMT Assembly Line.

We provide Hanwha SMT assembly line solutions, including Hanwha Assembly Line Equipments Hanwha productsHanwha Pick and Place MachineHanwha SMT Stencil PrinterHanwha Assembly LineHanwha SMT Reflow OvenHanwha SMT Inspection MachineHanwha SMT Spare PartsHanwha SMT Peripheral Equipment;  any kind SMT equipments you may need, please contact us for more information: wechat whatsapp:+8613691605420, Email: sales@flason-smt.com
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail/skype/phone/wechat online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. We have customer world wide, you can check our credit service with them !
B. Free Online installation, traning, programming and technical support !
C. One stop full Through Hole Assembly Line Equipments Solutions !

INQUIRY

CATEGORIES

CONTACT US

Contact: Tommy

Phone: +86 13691605420

E-mail: sales@flason-smt.com

Add: No.94,Guangtian Road,Songgang Street,Bao an District Shenzhen China